Equipment: Incubator

Seismic brackets: Anti-Seismic Restraint Straps

Fixing method: The incubator was secured against earthquakes using one (1) set of four (4) “Anti-Seismic Restraint Straps” attached to the sides of the incubator and the underside of the shelf top.

The shelf was also secured against earthquakes using “Anti-Seismic Restraint Strap with Gel Pads for Shelves” attached to the floor.
The “Anti-Seismic Restraint Straps” can be used to secure objects weighing up to 50 kg against earthquakes.

Equipment: Dry Heat Sterilizer

Seismic brackets: Anti-Seismic Restraint Straps

Fixing method: The dry heat sterilizer was secured against earthquakes using one (1) set of four (4) “Anti-Seismic Restraint Straps” attached to the sides of the sterilizer and the frame of the stand.

As shown in the photo, the straps were installed on the frame and underside of the top plate of the stand, as there was no space to install them on the top plate itself.

The “Anti-Seismic Restraint Straps” are not attached directly above the exhaust vent, but are offset to prevent interference with airflow.

Equipment: Water Distillation Apparatus

Seismic brackets: NSD Type and Anti-Seismic Restraint Straps

Fixing method: The water distillation apparatus is secured against earthquakes using four (4) “NSD Brackets” attached to the sides of the apparatus and the top plate of the stand.

The table is also secured against earthquakes using “Anti-Seismic Restraint Straps” attached to the top plate and the wall.